Automatic Cradle Spring

Rs. 2,999.00
In Stock Pre order Out of stock

The working principle of the automatic cradle device is to lengthen the spring with the weight of the baby and the cradle and drive the cradle to rise by the elasticity of the spring, so the number of needs to be installed strictly in accordance with the actual weight, otherwise it can not be adjusted to the best swing speed frequency. The speed adjustment knob of the control host machine adjusts the speed and frequency of the motor runner driving the rope to lift, and provides the power for the cradle to swing up and down repeatedly, not the taxed speed in a txed gear position. Each spring can load 2.5kg, a total of 7 springs, according to the weight of the number of springs, and the corresponding position

Ask a Question
Vendor: Abrar Ventures Pvt. Ltd.
SKU: BT-AUTOMATIC SPRING
Description
Load Bearing of Spring:

.Two: 3-6kg
.Three: 6-9kg
.Four: 9-12kg
.Five: 12-15kg

Spring Installation:

.Position can be balanced left and right
.Regularly check installation accessories; replace if damaged
.Mount pull actor with shelf or roof
.Do not hang the motor upside down
.Hanging empty cradle should be about 60cm from the ground

Timer Functionality:

.Timer can be set up to 4 hours
.Each click increases the timer by one hour

Special Features:

.Output indicator
.Power indicator
.Timing display and button
.Power switch
.Music and speed knobs
.Tensioner section for adjustment

Adjustability:

.Speed and music can be adjusted accordingly

Components Included:

1 Motor Unit
5 Springs (Different Load Bearing Capacities)
2 Hooks
3 Nylon Ropes
1 AC/DC Adaptor (Input: 100 to 240V AC) with a 100-inch Long Wire

These components form the essential parts of the kit for installation and operation. Refer to the user manual for detailed instructions on assembly, usage, and safety guidelines."
Reviews

Customer Reviews

Based on 1 review Write a review