Automatic cradle device
The working principle of the automatic cradle device is to lengthen the spring with the weight of the baby and the cradle and drive the cradle to rise by the elasticity of the spring, so the number of needs to be installed strictly in accordance with the actual weight, otherwise it can not be adjusted to the best swing speed frequency. The speed adjustment knob of the control host machine adjusts the speed and frequency of the motor runner driving the rope to lift, and provides the power for the cradle to swing up and down repeatedly, not the taxed speed in a txed gear position. Each spring can load 2.5kg, a total of 7 springs, according to the weight of the number of springs, and the corresponding position
Description
- Components Included: 1 Motor Unit 5 Springs (Different Load Bearing Capacities) 2 Hooks 3 Nylon Ropes 1 AC/DC Adaptor (100 to 240V AC) and 100-inch Wire, Cradle swing, and triangle hanger.
- Load Bearing of Spring: .Two: 3-6kg.Three: 6-9kg.Four: 9-12kg.Five: 12-15kg.
- Spring Installation: The position can be balanced left and right. Regularly check installation accessories; replace them if damaged. Mount pull actor with shelf or roof. Do not hang the motor upside down. Hanging empty cradle should be about 60cm from the ground.
- Timer Functionality: The timer can be set up to 4 hours. Each click increases the timer by one hour.
- Special Features: Output indicator. Power indicator.Timing display and button. Power switch. Music and speed knobs.Tensioner section for adjustment.
- Cradle cloth fabric : beetot cradle cloth is made from 100% cotton which is ultra soft.
- Cradle padded bed fabric : beetot cradle cloth has padded bed attached inside which is made in three layers (first layer) is soft Recron covered with (Second layer) soft cotton protector and (Last layer) stitched with soft cotton fabric.
- Maintenance : Easy maintenance, can be assembled, more durable, more convenient, more comfortable and easily washable.
Automatic cradle device